KAW ELECTRONICS Co.Ltd
KAW ELECTRONICS Co.Ltd
Add to Cart
Introduction of XK3190-A9+ Weighing Indicator:
adopts high precision double integral A/D conversion technology,
widely applied in the static weighing system like electronic floor scale, electronic platform scale and electronic truck scale, etc.
Features of XK3190-A9+ Weighing Indicator
A/D conversion with readability 1/30000
Use inner code to replace weight observing and analysis tolerance
Zero range setup (auto/manual)
Fast filled weighing bill print setup
Save 255 vehicle ID/net weight, 100 cargo ID, and 205 weighing records
Weighing data save protection in case of power off
Battery indication and low battery protection
Technical Parameter of XK3190-A9+ Weighing Indicator
Model A9 /A9P
Input signal range 1mV~24mV
Input sensitivity 1V/e
Load cell Excitation Dc 8V
Max. load cell connection 8 at 350 ohm
Display 7 bits LED ,7 status indications
Standard interface RS232C serial communication,Scoreboard at 20mA current loop Parallel printer
Technical Parameter of XK3190-A12+SS Weighing Indicator
Model A12 / A12S A12E / A12ES
Input signal range 10mV~15mV
Input sensitivity 1V/e
Load cell Excitation Dc 5V:/ 150mA
Max. load cell connection 4 at 350 ohm
Display 6 bits LED, 6 status indication
Standard interface RS232C serial communication,Scoreboard at 20mA current loop Parallel printer
| Introduction of XK3190-C602 digital weighing indicators | |||||
| Weighing indicator XK3190-C602 adopts 32-bits ARM processor of core Cortex M3 and high precision A/D conversion technology. It displays to the conversion of weight signals. The max conversion speed is over 200 times/sec. This indicator can be composed to catchweigher, Automatic gravimetric filling instruments, etc. It is used in various fast speed and high precision requirement weighing control. | |||||
| Features of XK3190-C602 digital weighing indicators: | |||||
| Selectable of four programme mode: self-control or external-control catchweigher, plus or minus Automatic gravimetric filling instruments. The catchweigher can be set to be general catchweigher and peak-value maintenance scale. It can store 5 batching material used as fix-quantity scale or catchweigher. | |||||
| Able to set digital filter intensity, A/D conversion speed | |||||
| Weighing data save, check and delete, protection in case of power off | |||||
| Real-time clock without effect on power | |||||
| Able to connect with digital load cell(e.g.HBM) | |||||
| Standard: 8 input, 2 of them can be high speed counting input, coder input or interrupt ( high speed reflection ) input; 8 output ( optional for relay box ). Be able to fix-quantity control of two materials for standard programme | |||||
| Input & output can be expanded, each IO expanding box can be expanded to 8 on/off input and 8 on/off output. The max. connection number of IO expanding box is four. Total quantity of IO is 40 input and 40 output. | |||||
| 2 separate serial communication interface, one is RS232, another is RS232/RS422/RS485 for selection, with two communication ways by continuous sending or on command method. | |||||
| Parallel/serial print interface, able to connect many kinds of printers, | |||||
| Chinese/English weighing date, accumulation, batching material or calibration can be printed. | |||||
| Optical isolation 20mA current loop scoreboard display interface | |||||
| Optical isolation 4-20mA/0-10V analog output ( optional ) | |||||
| Technical Parameter of XK3190-C602 digital weighing indicators: | |||||
| Accuracy class: ¢ó | |||||
| Max. verified counts: n=3000 | |||||
| Min. input signal voltage of verified counts e: 1¦ÌV | |||||
| Input signal range: -15mV ¨C 15mV | |||||
| Weighing load cell power supply DC: 5V; 80mA | |||||
| Max. connection number of load cell: 4 at 350¦¸ | |||||
| Load cell connection mode: 6 wire, auto compensation for long distance. | |||||
| Display: main display with 6 digits LED, data height: 0.56 inch, accessory display with digits LED, data height: 0.4 inch, 23 status instruction lights. | |||||
| With real time clock. Time and date can be displayed on the indicator panel. | |||||
| Max. data storage: 8064 weighing data or 4032 time & weighing data | |||||
| Scoreboard display interface: serial output, 20mA current loop signal | |||||
| Communication interface: 2 serial RS232C. one can be set to be RS422/RS485, baud rate 600-57600 for selection | |||||
| Parallel print interface: able to connect with micro printer, wide-line printer model LT800, KX-P1121 or LQ1600K | |||||
| Output: 8 optical isolation, open collector on/off output, be able to connect 8 relay box. | |||||
| Input: 8 optical isolation input, input signal + 12 - + 24V DC | |||||
| Input & output expand: able to connect 4 expanding module, each module including 8 optical isolation input and 9 optical isolation relay output. | |||||
| Baud rate: 600 | |||||
| Analog output: 1 photo electricity seclusion output. 4-20mA/0-5V/0-10V, three models for selection. | |||||
| Power supply: 110-230V AC; 50/60 Hz | |||||
| Operating temperature/humidity: 0¡ãC-40¡ãC; ¡Ü90%RH | |||||
| Storage temperature/humidity: -20-50¡ãC; ¡Ü90%RH | |||||
| Dimension of installation portiforium: 152¡Á77(mm) | |||||
| Weight: around 0.8kg
|
HOT SALES MODEL:
XK3190-A12ss
XK3190-A12E
XK3190-A9+
XK3190-A9+ P
XK3190-D10P
XK3190-DS1
XK3190-DS2
XK3190-DS3
XK3190-DS6
XK3190-A12+EK3
XK3190-T7E
XK3190-C8+
XK3190-C602
XK3190-A23P
XK3190-A24J3
XK3190-A26
XK3190-EX-A8
XK3190 -DS9
XK3190-DS8
XK3190-DS7
XK3190-T12E
XK3190-DS6
XK3190-DS3M3
XK3190-EX-A8
XK3190-A24
XK3190—A26